Smart Home Prototype with HC–05 Bluetooth and RFID Modules, Based on Microcontroller

Authors

    Indah Fenriana( 1 ) Dicky Surya Dwi Putra( 2 ) Bagus Dermawan( 3 ) Yusuf Kurnia( 4 )

    (1) Universitas Buddhi Dharma
    (2) Universitas Bina Nusantara
    (3) Universitas Buddhi Dharma
    (4) Universitas Buddhi Dharma

DOI:


https://doi.org/10.32877/bt.v5i2.564

Keywords:


Android, Bluetooth hc-05, Keypad Number, MIT App Inventor, RFID, Smarthome

Abstract

How is the performance of the Arduino Uno in processing smart home creation, as well as the implementation of the results of its classification into Android. This design uses various sensors, RFID for smart door locks and Bluetooth HC-05 for lights and fans. The benefit of making this prototype is to make it easier to turn on the lights and fans so you don't have to bother looking for light sockets or fans. Smart door lock using RFID is a technology used to identify opening doors. This design uses the Arduino Uno R3 device. This device can be remote with Android. The android application uses the MIT App Inventor software. This smart home design can make it easier for users to carry out activities at home where previously they could turn on and off the lights and fans in the living room, still manually by pressing the socket, now they can turn it on with a smart phone connected to the Bluetooth module via an application. Utilize Google's help on Android smartphones to control lights and fans using voice commands. In addition, the author also designed a smart door lock using RFID and matrix keypad, which previously opened and closed the door with a key, now only by attaching an RFID card or pressing a pin to open the door.

Downloads

Download data is not yet available.

References

D. Kurnianto, A. M. Hadi, and E. Wahyudi, “Perancangan Sistem Kendali Otomatis pada Smart Home menggunakan Modul Arduino Uno,” J. Nas. Tek. Elektro, vol. 5, no. 2, 2016, doi: 10.20449/jnte.v5i2.276.

A. S. Rafika, M. S. H. Putra, and W. Larasati, “SMART HOME AUTOMATIC MENGGUNAKAN MEDIA BLUETOOTH BERBASIS MIKROKONTROLLER ATMEGA 328,” CCIT J., vol. 8, no. 3, pp. 215–222, May 2015, doi: 10.33050/ccit.v8i3.348.

A. Suhaeb, S., Abd Djawad, Y., Jaya, H., Ridwansyah, Sabran, & Risal, “Mikrokontroler dan Interface,” in Buku Ajar Jurusan Pendidikan Teknik Elektronika UNM, 2017, pp. 1–3.

F. Barep, A.J., Amalia, H., Sherly, “SMART HOME WITH SMART CONTROL, BERBASIS BLUETOOTH MIKROKONTROLLER,” JEECOM, vol. 1, no. 1, pp. 1–11, 2019.

P. Asmaleni, D. Hamdani, and I. Sakti, “PENGEMBANGAN SISTEM KONTROL KIPAS ANGIN DAN LAMPU OTOMATIS BERBASIS SAKLAR SUARA MENGGUNAKAN ARDUINO UNO,” J. Kumparan Fis., vol. 3, no. 1, pp. 59–66, Apr. 2020, doi: 10.33369/jkf.3.1.59-66.

G. Pratama, “RANCANGAN SISTEM PENGUNCI RUMAH BERBASIS ARDUINO UNO R3 DENGAN RADIO FREQUENCY IDENTIFICATION (RFID) DAN SELENOID DOOR LOCK,” Ubiquitous Comput. its Appl. J., pp. 45–50, Jun. 2019, doi: 10.51804/ucaiaj.v2i1.45-50.

D. Rumimper, R., Sompie, S., & Mamahit, “Rancang Bangun Alat Pengontrol Lampu Dengan Bluetooth Berbasis Android,” J. Tek. Elektro Dan Komput., vol. 5, no. 3, pp. 24–33, 2016.

E. Arifanto, M., & Santoso, “No Title,” Politek. manufaktur astra, vol. 10, no. 8, pp. 1–9, 2015.

A. Jufri, “Rancang Bangun dan Implementasi Kunci Pintu Elektronik Menggunakan Arduino dan Android,” J. STT STIKMA Int., vol. 7, no. 1, 2016.

H. Santoso, “PANDUAN PRAKTIS ARDUINO UNTUK PEMULA,” in Google Books, 2015.

Downloads

Published

2022-12-14

How to Cite

[1]
I. Fenriana, D. S. Dwi Putra, B. Dermawan, and Y. Kurnia, “Smart Home Prototype with HC–05 Bluetooth and RFID Modules, Based on Microcontroller”, bit-Tech, vol. 5, no. 2, pp. 77–84, Dec. 2022.

Issue

Vol. 5 No. 2 (2022): bit-Tech

Section

Articles

License

Copyright (c) 2022 bit-Tech

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

I hereby assign and transfer to bit-Tech all exclusive copyright ownership rights to the above work. This includes, but is not limited to, the right to publish, republish, downgrade, distribute, transmit, sell, or use the work and other related materials worldwide, in whole, or in part, in all languages, in electronic, printed, or any other form of media, now known or hereafter developed and reserves the right to permit or license a third party to do any of the above. I understand that this exclusive right will belong to bit-Tech from the date the article is accepted for publication. I also understand that bit-Tech, as the copyright owner, has sole authority to license and permit reproduction of the article. I understand that, except for copyright, any other proprietary rights associated with the work (e.g. patents or other rights to any process or procedure) must be retained by the author. In addition, I understand that bit-Tech permits authors to use their papers in any way permitted by the applied Creative Commons license.

DOI : https://doi.org/10.32877/bt.v5i2.564
Abstract views: 640 / PDF downloads: 398